SeaPerch Remotely Operated Vehicle, Construction Manual, Page: 95 / 110

OPTIONAL PROCEDURE 3.5
– THREE TOGGLE SWITCHES
SeaPerch ROV Construction Manual
– Version 2010-04NW
3.5-5
28. Check all terminals on the switch to make sure that there are no stray wire
strands or solder bridges between the terminals. The wired switch should look
like the other horizontal thruster switch, similar to the one shown in Figure 3.5-1
(but with blue-pair wire colors). If using the control box as a switch wiring fixture,
the completed switches should look similar to those shown in Figure 3.5-4.
Figure 3.5-4: Completed Wiring for the Horizontal Thruster Control Switches
Procedure 3.5 – Continued