LT-14296r2.0 20180515
5/15/18
Seametrics • 19026 72nd Avenue South • Kent, Washington 98032 • USA
(P) 253.872.0284 • (F) 253.872.0285 • 1.800.975.8153 • seametrics.com
Electrical Quick Start Guide
AC Power w/Pulse (A1X/A2X)
for: iMAG 4700r/ AG3000r
Menu System
1.2345678
100
TOTAL
CU FT
X1000
RATE
GPM
T UNIT
R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
TOTAL = GALLONS
PRESS + TO SET TOTAL
UNITS FOR DISPLAY
T UNIT R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
TOTAL:
PRESS TO CHANGE
GALLONS
FWD TOTAL
The HOME Screen
displays flow volume, direction of the flow total and flow RATE
along with status conditions such as Empty Pipe. Two buttons below the LCD
display are used to access menu screens for viewing and changing meter setup
parameters.
These two buttons are light sensors which can detect when a finger is covering
them. Only three button touch actions are needed to control navigation
through the menus, settings changes and back to the home screen.
HORIZONTAL SCROLLING
:
Tap right-hand button to
scroll horizontally through
menu tabs or move
horizontally within a tab
dialog when applicable.
TAP
SELECT
: Tap left-hand button
to change a highlighted item
within a tab dialog.
TAP
ENTER/EXIT
: Hold left
button while tapping right
button once to enter or exit
a tab dialog or to navigate
between the HOME and
other menu screens.
+
HOLD TAP
All menu screens consist of two rows of tabs surrounding a dialog box that lets
you view and change setup parameters.
To enter the Menu System perform the
hold and tap sequence.
+
HOLD TAP
T UNIT
View or change TOTAL
volume units
R UNIT
View or change flow
RATE units
Set P
View or change pulse
output scaling
DAMP
View or change # of
seconds for rolling
average.
(0=1 second,
1=2 seconds, etc.)
EXIT
Return to HOME
SCREEN or enter
SUBMENU
T UNIT
R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
TOTAL = GALLONS
PRESS + TO SET TOTAL
UNITS FOR DISPLAY
T UNIT
R UNIT
SET P DAMP
SET 4 SET 20 SET F
EXIT
FLOW RATE = GALLONS/MIN
PRESS + TO SET RATE
UNITS FOR DISPLAY
T UNIT R UNIT
SET P
DAMP
SET 4 SET 20 SET F
EXIT
00001.0
GALLONS
PRESS + TO SET
GALLONS TOTALIZED PER
PULSE SENT OUT PULSE1
T UNIT
R UNIT SET P
DAMP
SET 4 SET 20 SET F
EXIT
DAMPING = 1
PRESS + TO SET
DAMPING VALUE
T UNIT
R UNIT SET P DAMP
SET 4 SET 20 SET F
EXIT
PRESS + EXIT MENU
AND RETURN TO FLOW
DISPLAY
The EXIT tab in the MAIN MENU has a second function. If you
tap
five times, you will be redirected to a SUBMENU screen
from which you can access additional options.
INFO
: Meter model, serial number, firmware version
Changing Settings
