> Installation / Replacement
A step by step assistance
1.
Before any operation, turn off the
~
12 V
power supply from the safety isolating
transformer
2.
Remove the existing projector from its niche,
immerged in the pool and place it on the edge
taking care of protecting the front of the
installed lamp
3.
Wipe the whole projector and the power
supply cable with a soft and dry cloth
4.
Unscrew the gland to make the power supply
cable free
5.
Unscrew the screws which maintain the sealing
support
6.
Unscrew the connectors and take off the
existing lamp
7.
Change the gasket
8.
Install the new SeaMAID lamp taking care of
greasing the back cup in contact with the gasket
(silicon grease provided)
9.
Re-screw the connectors of the power supply cable
10. Re-screw the sealing support tightening the
opposite screw by pair to distribute a balanced
force at any point of the lamp
11. Re-screw the gland blocking the power supply
cable
12. Replace the projector in its niche and wrap the
power supply cable around the back support
13. Turn on the power supply, the lamp lights
