> Use
PAR56RGB 500736 and 501399 model, 16 On/Off programs
Manual programs including
11 static colours and 5 controlled atmospheres
Recommendations :
In all cases, refer to the
leaflet provided with the
product.
In case of difficulty during
the installation or use, it
is recommended to
watch
the installation
video
and to read the
FAQ
on our website.
The PAR56RGB On/Off lamp control is manual, using the on/off switch of the
projector power. A cut of the current of less than 2 seconds makes the program change.
After a cut of the current for over 10 seconds, switch on restarts from the last program
used.
For the first use, the lamp lights on the program 1 (all LED lit). Then you go to the 11
static colours, followed by 5 automatic programs.
It is as well possible to use a
~
12V radio switch and install it on the
~
220V/12V
safety isolating transformer output.
To be synchronized on the On/Off manual mode, the lamp must be connected to the
same power supply.
