Buttons functions :
O > Off/On
S > Synchronization
C > Colour selection
P > Programs sélection
For the first remote controller use, it is necessary to pair it with the
projector
1.
Insert the provided battery in the remote controller; press each
button and check that the red LED lights
2.
From the general power supply, switch on the projector
3.
Switch off the projector and count more than 20 seconds to
switch it on again
4.
Make fast Off/On twice and switch on the projector
5.
Press the buttons O et S together on the remote controller
6.
The projector flashes several times and stays on, the pairing
process is confirmed.
Remote controller
PAR56RGB 500682 and 501405 model
