refractometer antifreeze/battery fluid/
screenwash/adblue®
model no:
Vs0052.V2
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
Familiarise yourself with the applications and limitations of the refractometer.
9
Keep the meter clean and in good condition.
8
do not
use the meter
for any purpose other than that for which it is designed.
warninG! when testing fluids, especially battery fluid, ensure that none comes into contact with your eyes or skin since
serious injury could result. wear protective gloves and clothes. ensure that all general workshop safety rules are applied
when working with vehicle batteries.
2. introduction
A
ccurately measures the strength of battery fluid, screenwash, antifreeze and Adblue® by measuring the refractive index of light passing
through the mixture. Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology), G13 and aqueous/urea content
of Adblue®. Temperature corrected prism ensures accuracy. Eyepiece with adjustable focus. Simple calibration check using distilled water.
Supplied with pipette and storage case.
3. test procedure
3.1.
Check that the prism and lid are clean.
3.2.
Open lid, hold tester so that prism surface is level and with pipette, place a drop of the fluid onto the prism.
3.3.
Close the lid, to disperse the fluid evenly with no bubbles.
3.4.
Turn eyepiece so that the display is correctly focused.
3.5.
Read off the value, on the appropriate scale, indicated by the pronounced LIGHT-DARK dividing line.
3.6.
On completion of each test carefully clean the prism with a lint-free dry cloth. The tester incorporates a display, subdivided into five
scales see fig.2 overleaf, from which to check the following fluids.
V
S0052.V2 | Issue:1 28/02/18
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear eye
protection
Wear protective
gloves
fig.1