6.1
Battery care and use.
6.1.1 Keep batteries dry at all times.
6.1.2 Do not combine used batteries with new ones or mix
battery types.
6.1.3 Insert/remove the batteries carefully as described in the
Section 5.1.
6.1.4 Never use a battery if it is cracked or broken.
6.1.5 Never heat or incinerate batteries.
6.1.6 See battery disposal information below.
6.1.7 Remove the batteries if stored for a long period of time.
6.2
Calibration
6.1.1 Periodic Calibration is required for this product, contact
your Sealey dealer for details.
6.3
General Precautions
STORAGE - Do not store this product in dusty, sandy
or humid conditions or near any heat source. Do not
leave it in places where it may be subject to high
temperatures. Always keep the torque adaptor dry.
Water or other liquid, will damage the electronic
components inside.
MAINTENANCE - If the tool is not used for a longer
period of time, please remove the batteries in order to
prevent damage from leaking
CLEANING – Always turn off this product before
cleaning. Use only a damp cloth for cleaning. Never
use any type of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
6. MAINTENANCE
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for
any claim.
INFORMATION:
Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
STW291 Issue No.1 28/06/12
Original Language Version
© Jack Sealey Limited
5.8.3 When the programmed torque has been achieved, the
unit will emit a continuous tone and the LED light will
illuminate.
5.8.4 When the programmed ANGLE has been achieved,
the buzzer will sound for 1 second. NOTE: When
wishing to work in a counter-clockwise direction,
press the “ M/u ” button. The display will then show a
minus (-) sign on the left side of screen.
NOTE: NEVER USE THE TORQUE ADAPTOR WHEN THE
BATTERY IS IN A LOW STATE OF CHARGE AS
THIS WILL AFFECT THE PRODUCTS ACCURACY.
MODEL:
STW291 (Full Specification)
Range:
20 - 200Nm (15 - 147.5lb.ft, 354 - 1770lb.in)
Accuracy:
±2%
Resolution:
0.1Nm / 0.1 lb.ft / 1lb.in
Drive:
1/2”
Units:
Nm / lb.ft / lb.in.
Angle Range
0º - 360º (CW / CCW)
Angle Accuracy
±1% of reading ±1º
Angle velocity
> 10º / Sec < 360º / Sec
Display resolution
1º
Operating Modes
Track & Peak
Power
6V, Lithium batteries CR2032 x 2
Operating temp:
0 ~ 40ºC / -32 ~ 104ºF
Storage temp:
-20 ~ 45ºC / -4 ~ 113ºF
Humidity
Humidity up to 60% Non condensing
ENVIRONMENTAL PROTECTION.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.
WARNING: Do not dispose of by fire.This could result in an explosion.
Do not expose battery to intense heat or fire as this could cause an explosion.
Battery Removal: Refer to Section 5.1.
ONLY dispose of or recycle according to local authority regulations. Under the Waste Batteries and Accumulators
Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as
defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey
Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
