background image

• 

8

 •

CHARGING

1. 

Ensure that all of the charger components are in place and in good working condition.

2. 

Connect the battery, following the precautions listed in sections 6 and 7.

3. 

 Connect the AC power following the precautions listed in section 8.

4. 

After AC is connected, display will show 

SELECT CHARGE MODE

. Press button once 

to enter 12V charge mode, press button once again to enter 24V charge mode. When 

charging starts, the 

GREEN LED

 will be solid, and the display will show 

ANALYZING 

12V BATTERY

 or 

ANALYZING 24V BATTERY

 while the charger determines that the 

battery is properly connected and the condition of the battery.

5. 

When the battery is fully charged, the 

GREEN LED 

will pulse.

6. 

When charging is complete, disconnect the AC cord from the supply mains, remove the 

clamp from the vehicle’s chassis, and then remove the clamp from the battery terminal.

RECONDITION

1. 

Ensure that all of the charger components are in place and in good working condition.

2. 

Connect the battery, following the precautions listed in sections 6 and 7.

3. 

Connect the AC power following the precautions listed in section 8.

4. 

After AC is connected, display will show 

SELECT CHARGE MODE

. Press button once 

to enter 12V charge mode first, then double click button to enter 12V Recondition mode. 

Press button once again to enter 24V charge mode. When charge starts, the display 

will show 

RECONDITION TIME REMAINING XXX MINUTES

. If the recondition is 

successful, the display will show 

RECONDITION SUCCESSFUL - START NORMAL 

CHARGING

, If the recondition is unsuccessful, the display will show 

CHARGE 

ABORTED-BAD BATTERY

, and the 

GREEN LED

 will flash.

5. 

When the battery is fully charged, the 

GREEN LED

 will pulse.

6. 

When charging is complete, disconnect the AC cord from the supply mains, remove the 

clamp from the vehicle’s chassis, and then remove the clamp from the battery terminal.

BATTERY CONNECTION INDICATOR

If the charger does not detect a properly connected battery, charging will not start and the 

digital display will show one of these messages:  

12V-CONNECT CLAMPS- PRESS FOR 24V-DOUBLE FOR RECONDITION

12V-RECONDITION CHARGE-PRESS FOR 24V-DOUBLE FOR REGULAR 

24V-CONNECT CLAMPS- PRESS FOR 12V-DOUBLE FOR RECONDITION

24V-RECONDITION CHARGE-PRESS FOR 12V-DOUBLE FOR REGULAR

  

Make sure the charger is connected to the battery and the connection points are clean and 

making a good connection. If the display shows 

WARNING-CLAMPS REVERSED

, unplug 

the charger from the AC outlet, reverse the connections at the battery, and then plug the 

charger back in.

BATTERY CHARGING TIMES

CCA = Cold Cranking Amps      Ah = Amp Hour

APPLICATION

BATTERY 

SIZE

CHARGING TIME (hours) 

6A     10A     12A     15A

POWERSPORTS

6 Ah

32Ah

2       1.5        

1       0.5

                 

        

5         4         

3         2

AUTOMOTIVE

300 CCA

1000 CCA

4         3         2       1.5

                          

10        7        5.5        4

MARINE

50 Ah

230 Ah

5       3.5      2.5       2

                          

19     11.5      9.5      7.5

NOT 

RECOMMENDED

Times are based on a 50% discharged battery and may change,  

depending on age and condition of battery.

Summary of Contents for SPI1224












Reviews: