2. INTRODUCTION
C
ompact digital tyre inflator with output of 12ltr/min. Pressure gauge reads up to 120psi. 140mm Extension tube with Schrader connection.
Micro USB rechargeable (cable not supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor
and balloon/inflatables adaptor. Built-in 1W SMD LED for ease of use at night. Preset the desired psi to begin operation and unit will cut out
automatically once that pressure is reached. Auto cut-out if hose kinks, to avoid damage to pump
.
1.Outlet Grid
2. Pressure gauge
3. Reduce button
4.Increase Button
5.Unit Button
6.Start/Stop button
7.LED Lighting button
8.Indicator
9. Inlet grid
10.LED Lighting
11.Hose Connector
12.Outlet Grid
13. USB output port
14.Micro USB input port
15. Air hose
16. 4×Valve adapters
3. SPECIFICATION
Hose Length:
..............................................................
140mm
T
ypical Inflation Time:
..........
0-30psi in 619sec (175/70/R13)
M
aximum Pressure:
....................................................
120psi
A
irflow:
........................................................
0.42cfm/12ltr/min
USB Output: .................................................................
5V/2A
Battery: ......................................................
2000mAh/22.2Wh
4. OPERATION
4.1.
CHARGING
4.1.1.
Please charge the battery fully before use (fig.2). Especially
for the first time or after it is unused for a long time. Recommend
an USB adapter with output capability of 5V/1.5A or 5V/2A,
about 4 hours for full charging. Other functions of the product
are not available during charging.
4.2.
USING THE USB CHARGING PORT
4.2.1.
USB output of
CTI120 is plug and play
4.2.2.
The air pump will not work, when you are
charging a device from the tyre inflator.
The USB output will turn off automatically.
fig.1
fig.2
fig.3
C
TI120 Issue 2(3) 07/03/18
Original Language Version
© Jack Sealey Limited
