4. oPerATion
WArninG:
Remove battery before AnY maintenance.
4.1.
Ensure that you have read, understood and comply with all the safety instructions in Section 1.
4.2.
To remoVe BATTery
4.2.1.
To remove the battery from the equipment, depress the spring loaded button on the battery pack. Remove the battery pack from the
tool by sliding it out.
8
do noT
touch the metal terminals.
4.2.2.
Slide a charged battery into the heel of the tool ensuring full engagement of the terminals.
4.3.
inflATion / deflATion
4.3.1.
Screw the required adaptor to the unit outlet and tighen in place using the collar.
4.3.2.
Turn on the unit using the central button (fig.2).
4.3.3.
Set the required units by cycling through options using the On/Off button.
4.3.4.
Set the required pressure using the
+
or
-
buttons (fig.2). When the set value is reached the unit will automatically cut out.
5. mAinTenAnCe
WArninG:
Always disconnect the battery before carrying out any inspection, maintenance or cleaning.
5.1.
GenerAl insPeCTion
5.1.1.
Regularly check that all the fixing screws are tight.
5.1.2.
Repairs should be carried out by an authorised service centre.
5.2.
CleAninG
5.2.1.
Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly and shorten the device’s service life.
5.2.2.
Clean the body of your unit with a soft brush, or dry cloth.
5.2.3.
Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient, a mild detergent on a damp cloth is recommended.
5.2.4.
Water must never come into contact with the tool. Ensure the tool is thoroughly dry before using it.
5.3.
sTorAGe
5.3.1.
Store this tool carefully in a secure, dry place out of the reach of children.
Original Language Version
© Jack Sealey Limited
C
P20VAP Issue 1 10/12/19
sealey Group, Kempson Way, suffolk Business Park, Bury st edmunds, suffolk. iP32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
enVironmenT ProTeCTion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee reGulATions
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
fig.2
