1.3.
Battery Safety PreCautioNS
WarNiNg!
Batteries contains Lithium-ion which is dangerous. Handle with care to avoid damage, fire, corrosion or personal injury.
9
Charge battery prior to its first use. The battery will have been shipped in a low charge state.
To reduce the risk of burns or fire:
8
Do Not
attempt to open, disassemble, modify or service the battery pack.
8
Do Not
crush, puncture, short external contacts or dispose of in fire or water.
8
Do Not
expose to temperatures above 40°C (104°F).
9
Use only the charging base to charge the CP20V series batteries.
WarNiNg!
Dispose of spent batteries correctly as they contain Lithium-ion.
DaNger! Do Not
attempt to disassemble the
battery. For safety and environmental reasons
Do Not
discard in domestic waste or by burning. onlY discard or recycle
according to local authority regulations.
WarNiNg!
Do Not
allow a leaking battery to contact your person.
2.
i
iNtroDuCtioN
Mains dual charger for Model No’s CP20VBP2, CP20VBP, CP20VBP4. LED indicates status of battery from charging to full. Suitable
for use with the CP20V Series.
3. SPeCifiCatioN
model No.: .......................................................... CP20VmC2
Supply: ............................................................
230V AC 50Hz
output: .......................................................................20V dC
Applications: ....................
CP20VBP2, CP20VBP, CP20VBP4
4. oPeratioN
Note-:
When new, the batteries will have been shipped in a low charge state. Fully charge the batteries before using your tool.
4.1.
To remove the batteries from the equipment, depress the spring loaded button on the battery pack. Remove the battery pack by sliding
out.
Do Not
touch the metal battery terminals.
4.2.
The batteries are designed to fit into the charger one way only. Insert the batteries fully and firmly to seat them into the charging base.
4.3.
Take the base charger and plug it into the mains, switch on the power and the led on the charger will illuminate. If no batteries are
loaded and the unit is powered on, the leds will glow green.
4.4.
While a battery is charging, the relevant red LED on the charger will illuminate.
4.5.
When the green LED on the Charger illuminates permanently, the battery is fully charged.
4.6.
Remove the battery from the charger. Switch off and remove the plug from the mains.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imPortaNt:
no liability is accepted for incorrect use of this product.
WarraNty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Sealey group, Kempson Way, Suffolk Business Park, Bury St edmunds, Suffolk. iP32 7ar
01284 757500
01284 703534
www.sealey.co.uk
Battery remoVal
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
Weee regulatioNS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
eNViroNmeNt ProteCtioN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Original Language Version
© Jack Sealey limited
C
P20VMC2 Issue 1 01/11/19
