background image

5.11. 

  

Clip accessory hooks (fig.14.P) firmly into tray (fig.14.A). Hang accessory bins (fig.14.Q) on any panel (fig.1.F, fig.1.G). (fig.14).

6.  MAINTENANCE

6.1. 

  

Ensure castors are free to rotate at all times, lubricate as required.

6.2. 

  

Ensure drawers run smoothly, lubricate as required.

6.3. 

  

Wipe down surfaces with a damp cloth.

   fig.14

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 

according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

AP47PWS       Issue 1     11/03/2020

Original Language Version

© Jack Sealey Limited

Summary of Contents for AP47PWS

Page 1: ...utions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood that common sense and caution are factors which cannot be built into this product but must be applied by the operator 2 INTRODUCTION Durable mobile workstation with four drawers and cupboard Sheet metal drawers with structural foam fronts run on ball...

Page 2: ...t panel with slides fig 5 G into side of assembly at handle end NOTE Panel fit at this stage will be loose NOTE Ensure full engagement between panel fig 3 F and fig 3 G into tray fig 5 A NOTE Slide overhang on side panel fig 1 G to face workstation opening fig 5 5 3 Install centre support fig 6 H with drawer slides facing matching slides in end panel fig 6 G fig 6 Slide overhang to face workstatio...

Page 3: ...e base fixes into the drawer side fig 10 5 8 Take previously assembled drawer and attach to drawer front fig 11 M Attach using screws fig 11 EE fig 11 NOTE Ensure all location clips are fully engaged from drawer sides to drawer front 5 9 To install the drawers fig 12 fig 13 extend the drawer slides fig 12 1 and insert the brackets fig 12 2 on each side of the drawer into the slots on the slides en...

Page 4: ...aste All tools accessories and packaging should be sorted taken to a recycling centre and disposed of in a manner which is compatible with the environment When the product becomes completely unserviceable and requires disposal drain any fluids if applicable into approved containers and dispose of the product and fluids according to local regulations Note It is our policy to continually improve pro...

Reviews: