2.
DESCRIPTION & SPECIFICATIONS
3
Keep unauthorised persons at a safe distance from the working area. Persons within the working area are subject to the same dangers.
3
Remove ties, watches, rings, and other jewellery, and contain long hair.
7
DO NOT use the welder for any purpose other than for which it is designed.
7
DO NOT use the welder in damp or wet locations.
7
DO NOT stand welder on a metal workbench, car bodywork or similar object.
7
DO NOT touch any live metal parts of the torch or electrode while the machine is switched on.
7
DO NOT weld without a welding safety head shield, gauntlets, clothing, (see above warning).
s
s
DANGER!
DO NOT weld near inflammable materials, solids, liquids, or gases, (see above warning).
7
DO NOT operate welder while under the influence of drugs, alcohol or other medication, or if you are fatigued.
7
DO NOT operate the welder if it or its cables are damaged.
7
DO NOT allow untrained persons to operate the welder.
7
DO NOT pull welder by the cable, or electrode holder. DO NOT bend or strain cables, protect from sharp or abrasive items. DO NOT stand
on cables or leads. Protect from heat. Long lengths of slack must be gathered & neatly coiled. DO NOT place cables where they endanger others.
7
DO NOT touch the electrode holder or workpiece immediately after welding as they will be very hot. Allow to cool.
7
DO NOT open the cover of the machine. Switch off machine and remove the plug from the power supply after use.
Model No.
Welding
Electrode
Cooling
Output
No-Load
Power Input/
Weight
Current
Capacity
Cable Ø
Voltage
Efficiency
150XL
. . . . . . . .40-150A . .Ø1.6-3.2mm . . .Air Cooled . . . .10mm
2
. . . . . . .48V . . . . . .230V 1ph . . . .20 kg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.35 kVA
Model No.
Welding
Electrode
Cooling
Output
No-Load
Power Input/
Weight
Current
Capacity
Cable Ø
Voltage
Efficiency
150XTC
. . . . . . .40-150A . .Ø1.6-3.2mm . . .Turbo Fan . . . .16mm
2
. . . . . . .48V . . . . . .230V 1ph . . . .20 kg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.35 kVA
160XTC
. . . . . . . .55-160A . . . . .Ø2-4mm . . .Turbo Fan . . . . .16mm
2
. . . . . . .49V . . . . . .230V 1ph . . .21 kg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.98 kVA . . . . . . . .
200XTC
. . . . . . . .55-200A . . . . .Ø2-4mm . . .Turbo Fan . . . . .16mm
2
. . . . . . .52V . . . . . .230V 1ph . . .27 kg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.98 kVA . . . . . . . .
HEAVY DUTY TURBO COOLED
ARC WELDERS
Turbo Forced Air Cooling System, the
XTC range has increased duty cycle
and performance. Featuring single
vented wrap-around shells fitted to a
heavy duty chassis with wheels and
chassis support and a
screw-type stepless welding current
control. Supplied with carrying handle
and extension bar for easy mobility.
Complete with full accessory kits
including electrode holder, earth clamp
chipping hammer and brush.
IMPORTANT INFORMATION
To operate all welders to their full capacity, you
must
run them on the correct power supply. To check the amperage,
use the following formula:
kVA Rating x 4.35 = Correct Amps Supply
Model No.
Welding
Electrode
Cooling
Output No-Load
Power Input/ Weight
Current
Capacity
Cable Ø
Voltage
Efficiency
250XT
. . . . .35-170A (230V) . . .Ø2-5mm . .Forced Air . . .25mm
2
. . . . .48V . .230V 1ph, 415V 3ph . .48 kg
. . . . . . . . . .50-250A (415V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 kVA . . . . . . .
250XT/DV
. .32-170A (230V) . . .Ø2-5mm . .Forced Air . . .25mm
2
. .48V/70V . .230V 1ph, 415V 3ph . .48 kg
. . . . . . . . . .80-250A (415V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 kVA . . . . . . .
SUPER DUTY TURBO COOLED
ARC WELDERS
Models have Dual Voltage input,
allowing use on single phase 230V
input up to the maximum that can be
achieved on a 30 amp power supply.
Higher performance can then be
achieved by switching to 415V and
connecting to an appropriate supply.
Please consult an electrician.
Model
250XT/DV also has Dual Voltage
output allowing use with wider range of
electrodes.
HEAVY DUTY AIR-COOLED ARC
WELDER
The XL model is fitted with a heavy
duty air-cooled transformer. Features
include single vented wrap-around
shell fitted on heavy duty chassis,
carrying handle and screw-type
stepless welding current control.
Supplied with a full accessory kit,
including electrode holder, earth clamp
and hammer/brush.
Arc Welders - (0051) - (3) - 070601