![background image](http://html1.mh-extra.com/html/sealersales/impresse-frm-1010/impresse-frm-1010_instruction-manual_1223750008.webp)
F R M - 1 0 1 0 I N S T R U C T I O N M A N U A L
4
Motorized rubber conveyor with speed control
Capable of speeds up to 472 inches/minute
How Does the FRM-1010 Work?
FRM-1010 is comprised of a stainless steel frame, speed adjusting mechanism,
sealing temperature control system and transmission system. Turning on the heat
for the band sealer will cause a rapid rise in the temperature of the heating blocks.
Required temperature and speed can be adjusted via the temperature controller
and speed adjusting device. Plastic material to be sealed is placed on the guide and
conveyor. Conveyor will then take the material between the two heating blocks to fuse the material
together. Material will then pass through the cooling blocks to allow the material to congeal. Material
will then pass through the embossing wheel for a meshed seal line. Finally, a photoelectric sensor will
direct the dry ink coder to print a clear and legible print at the seal line.
The motor drives the sealing belts, drive belts and conveyor simultaneously.
Specifications
FRM-1010I (Horizontal) FRM-1010II (Vertical)
Power
110V/60Hz
Motor Power
60W
Sealing Speed
0-472 inches/minutes
Sealing Width
15mm
(Optional 20mm width unit available via special order)
Temperature Range
0-300˚C (572˚F)
Conveyor Size
42” x 8”
Max Conveyor Load
6.6lbs
Min/Max Height of Bag
(Vertical Only)
N/A
7.9” / 12.6”
Printing Heating Power
40 x 2 (W)
Character Size
3x5x7mm / 18PT – 2 lines
2x3x7mm / 10.5PT – 3 lines (additional option available)
Printing Colors
Black, Blue, Green, Red, White, Yellow
Dimensions
42” x 18” x 14”
42” x 16” x 27”
Net Weight
119lbs
132lbs
Basic
Principles
FRM-1010 is easy to
use. To seal, adjust
temperature and place
bag on conveyor
Summary of Contents for Impresse FRM-1010
