F R M - 1 0 1 0 I N S T R U C T I O N M A N U A L
2
While machine is operating do not touch the heating and/or cooling blocks. Blocks will be extremely hot
and may burn your hands.
While machine is in operation, do not place fingers, tools, or other foreign objects on or into
the machine. Do not touch any moving parts while machine is operating. Fingers may get caught in
between the gears / pinch points and cause significant injury.
Thermoplastic bags and material are hand fed into the machine. Place bag on the guide and carefully feed
the bag through the band sealer. Fingers may be placed on the guide but do not allow fingers to touch any
of the moving parts on the band sealer.
Use emergency stop to turn off machine should material/bags get jammed into the machine. Carefully pull
material out of the band sealer. Do NOT use fingers to touch any part of the machine.
The band sealer is not water resistant or water proof. Spraying down the machine will damage machine or
cause electrical shock. Do not submerge the band sealer into water or liquid.
Do not operate band sealer in a corrosive or humid environment.
Always keep the machine clean, lubricated and in good working condition. Follow any maintenance and
lubrication procedures outlined in this manual. Make sure unit is disconnected from power source before
cleaning.
NEVER use any accessories or parts from other manufacturers. Machine should not be altered or modified
using parts that are not genuine authorized parts. Doing so will VOID YOUR WARRANTY.
Never leave the band sealer unattended. Be safe, disconnect the band sealer from power source before
leaving work area.
Close supervision is necessary when any machine is near children or persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge . This sealer is NOT to be used by children or
by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
DO NOT use the band sealer outdoors.
DO NOT use the band sealer while under the influence of drugs, medications or alcohol.
SAVE THESE INSTRUCTIONS
-
REFER TO THEM OFTEN AND USE THEM TO INSTRUCT OTHERS.
Summary of Contents for Impresse FRM-1010
