F R M - 1 0 1 0 I N S T R U C T I O N M A N U A L
18
its lowest setting (or counterclockwise). If you want to print on the left side of the bag, turn the
coding seat to a higher setting (or clockwise).
Printing Optimization
1.
Print quality will be determined by the degree of ink melting, distance between the ink roller and
printing wheel and distance between the silicone wheel and printing wheel.
2.
Over time, decrease the gap between the ink roller and printing wheel.
3.
A newer ink roller will require a lower temperature vs. an older ink roller. Make adjustments to
ink temperature as necessary.
4.
Ensure there is adequate pressure on the silicone wheel
(Figure 36, Item #31)
by the printing
wheel. We suggest using factory default settings before making any adjustments. Adjustments
may be needed based on material thickness.
5.
If the printing wheel rotates and there is no thermoplastic material running through the band
sealer, excess ink will rub off on the silicone wheel. Clean the silicone wheel with a shop cloth
and silicone spray to remove any excess ink.
6.
Remove the ink roller from unit until sealer is ready for use. If ink roller is left in the
machine while not in use, this may result in melting of the ink roller and messy print. To
clean, wipe down belts, silicone wheel, and other parts with silicone spray and cloth.
Summary of Contents for Impresse FRM-1010
