Safety Information
4
Intended Use
The
AquaSEAL™ SW-4000
liquid laminator is intended for use with medium, large, and
grand format graphic output Graphics can vary in widths from 0.3–3.3M (1–10 ft.) in
width and can be up to 90M (295 ft.) in length (dependent on thickness of media used).
The
AquaSEAL™ SW-4000
liquid laminator is intended for use with
AquaSEAL™
water
based sealant only
. Use of solvent-based or other manufacturers’ sealants may
damage the machine and may void any warranty.
Safety Instructions
Caution
When handling any chemical products, read the manufacturers’ container labels and the
Material Safety Data Sheets (MSDS) for important health, safety, and environmental
information.
To obtain MSDS Sheets for
AquaSEAL™
Products, Please call your local distributor.
In case of emergency, please telephone: +44 (0)1268 530 331 Europe, or
(800) 486-6502 USA
When using any equipment, always follow the manufacturers’ instructions for safe
operation.
Warning
Avoid contact with heat source during use. Wear heat resistant gloves and safety
glasses. Failure to avoid contact with hot surfaces may cause burns. Always observe
manufacturers’ recommendations when handling chemicals.
Summary of Contents for AquaSEAL SW-4000
Page 22: ...Section 4 After Sales Support 21...
