SEAL 65ProMD, User Manual

Page: 28 / 63

28 7003338 - User Manual 65 Pro MD
5.1.1.2 The Heater Screen
Both the top and bottom rollers can be heated. You can set the heat by typing in the
temperature. When typing you will see the numbers turn from red to white indicating a
valid temperature. Use the “X” to backspace and the green check to apply the
temperature. Use the purple arrows to adjust temperature up or down in steps of 1 degree.
Click the icon on the right of the slider bar to actually turn on/off the heaters.
After turning the heaters on and setting the temperature, make sure to click the green
apply button. The result will probably be a set of RED numbers in the roller icons on the
Home screen. These numbers will turn green when the roll is heated to your setting.
• There are two Temperature screens – upper and lower main roll temperature
screens.
• These screens are entered by pressing either temperature button on the left top
corner of the screen.
• The only differences in the two screens are the icons, the current set point
displayed in the temperature display, and the current roll temperature being
displayed below the slider icon.
• This screen will remain open until the check mark is pressed or for 15 seconds of
inactivity, after that the screen will revert to the home screen.