SEAL 65ProMD, User Manual, Page: 37 / 63

Machine Operation 37
E
n
g
lis
h
After the check mark is selected you will return to the home screen. The numbers
indicating the nip height set point will be updated with the new set point value. They will be
RED until the nip reaches the desired position. Then the numbers will turn green.
The nip will not go to a new position if the rolls are down. You can change the set point
with the rolls down and then raise the rolls when you are ready to have the nip move.
Also, the rolls will not lower while the nip is in motion. After the nip set point is achieved
(numbers turn green) then the rolls will lower.