INSTALLATION
MANUAL
Product:
Document #:
Rev:
Page:
MODEL 7000A GYRO
90051
3
4 of 4
Section 5: INSTALLATION CHECKLIST AND SUPPLIES
List of common tools that may be required for installation
Item
Description
Use
1
Wire cutter
Power, serial comm cables
2
Wire stripper
Power, serial comm cables
3
1/8 hex key
Gimbal sensor mount plate
4
2.5 mm hex key
Gimbal angle sensor
5
#2 phillips long blade screw driver
Ground screw, drive box mount
6
#3 phillips screwdriver
Drive, control enclosure lids
7
3/8 combination wrench
Drive box, keypad mounting
8
Slot screwdriver, 1/8 inch
Barrier terminals
9
Slot screwdriver, 5/64 inch
Field assembly connectors
10
Slot screwdriver, 1/4 inch
Glycol valves
11
1/4 inch nutdriver
Hose clamps
12
Utility Cutter
Glycol hose
13
Hack saw handle
Keypad mounting
14
Hack saw blade
Keypad mounting
15
Nut driver, 3/8 inch
Keypad mounting
16
Drill bit, 13/64 or 5mm
Keypad mounting
17
Drill bit, 1/4
Pilot for hole saw for display
18
Adjustable wrench, 12 in
Cable glands
19
Terminal or quick disconnect crimper
Power cables
20
Utility knife
Scoring cable jackets
