ZERO FIGHTER.
Instruction Manual
10
INSTALLING THE STOPPER ASSEMBLY
!
1) Using a modeling knife, carefully cut
off the rear portion of
one
of the two nylon
tubes leaving 1/2” protruding from the rear of
the stopper. This will be the fuel pick up tube.
!
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of the
line to the weighted fuel pickup and the other
end to the nylon pickup tube.
PARTS REQUIRED
FUEL TANK
!
{1} Molded Nylon Fuel Tank
!
{1} Preassembled Stopper Assembly
!
{1} Metal Weighted Pick-Up
!
{1} Molded Foam Fuel Tank Support
ADDING DECALS.
!
1.Locate the decal sheet include in the kit.
Use the box art photos and some pictures
below as an approximate position reference
for the application of the inclued decals.
