Seagull Models ZERO FIGHTER, Assembly Manual

Page: 19 / 22

ZERO FIGHTER.
INSTRUCTION MANUAL
19
! ! ! ! !
3) Using a 1mm drill bit and the control
horn as a guide, drill the mounting holes
through the rudder .
! ! ! ! !
4) Mount the control horns by inserting the
screws through the control horn bases and rudder
then into the mounting backplates. Do Not
overtighten the screws or the backplates may crush
the wood.
Control Horn
Mounting Screws
Mounting Plate
TAIL WHEEL PUSHROD INSTALLATION
ELEVATOR VONTROL HORN INSTALLATION
! ! ! ! !
1) Locate the one nylon control horn.
! !
! ! !
2) Position the elevator control horn on
the bottom side of elevator. The clevis
attachment holes should be positioned over
the hinge line.
! ! ! ! !
5) Installing the tail fairing as same as
picture bellow.
! ! ! ! !
5) Rudder pushrod installation as same
as picture below
Pushrod wire
4 pcs machine screws
(2pcs for each side)
Epoxy secure
tail fairing
Tail wheel
pushrod wire
Stearing arm
Tail wheel pushrod
Rudder pushrod.