Van’s RV- 8
Instruction Manual.
28
For the larger decals we recommend a
“wet” application method - 1) Peel the pa-
per backing sheet off the decal.; 2) Use a
soapy water product (like window clean-
er) to spray the adhesive side of the decal.
Also spray the area of the model where the
decal goes.; 3) Lightly place the decal onto
the wet surface of the model. The liquid
cleaner will keep the decal from sticking
to the model, to give you time to shift it
around into exact position.; 4) Once in
position, use a piece of stiff cardboard to
squeegee the excess liquid out from under
the decal. Squeegee repeatedly, removing
all excess liquid and air bubbles. Mop up
the liquid with a paper towel. Allow to
dry overnight.
INSTALLING BATTERY - RECEIVER.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
Receiver.
Battery.
ATTACHMENT WING- FUSELAGE.
Insert two wing panels as pictures below.
Attach the aluminium tube into fuselage.
Wing tube.
Cut.
Epoxy.
