SEA FURY.
Instruction Manual.
16
Repeat the procedure for the other wing
half
.
Pen.
Mark point.
Cut.
M2 lock nut.
Snap keeper.
!
4) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the aileron halves.
!
5
)
Mount the control horns by inserting the
bolts through the control horn bases and
aileron halves, then into the mounting
backplates. Do not overtighten the nuts or the
backplates may crush the wood.
Aileron control
horn.
!
2) Locate the nylon control horns,nylon
control horn backplates and three machine
screws.
!
3) Position the aileron horn on the bottom
side of aileron.
12mm.
2 x 30mm.
M3 lock nut.
M3 lock nut.