Seagull Models SEA 358, Assembly Manual

Page: 14 / 64

1/3 ScaleMorane Saulnier AI Instruction Manual.
14
.
31 .
32 .
Use a tie wrap to secure the shock cord
ends together. Use hemostats to hold the
shock cord while installing the tie wrap.
33.
34 .
35 .
Repeat the previous steps to install the
remaining main axle and shock cord.
36 .
Cut the excess of the tie wrap so the
landing gear wing cover can be installed.
When the shock cord is installed, it will
it inside the landing gear wing and will
not interfere with the installation of the
cover. Tighten all the hardware associ-
ated with the landing gear at this time.