Seagull Models SEA 358, Assembly Manual

Page: 7 / 64

7
Apply 2-3 drops of thin C/A to each
of the mounting holes. Allow the C/A to
cure without using accelerator.
4.
Use dental loss to secure the connec-
tion so they cannot become unplugged.
Secure the servo to the aileron hatch
using Phillips screwdriver and the screws
provided with the servo.
5 .
6 .
7 .
C/A glue
Apply 1-2 drops of thin C/A to each of
the mounting tabs. Allow the C/A to cure
without using accelerator.
C/A glue
8 .
Remove the string from the wing at the
servo location and use the tape to attach it
to the servo extension lead. Pull the lead
through the wing and remove the string.
9 .
10 .