23
145mm
M4x20mm.
Epoxy.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller
and spinner cone.
Speed control.
Battery.
5) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M4x20mm hex head bolts to se-
cure the motor. Please see picture shown.
8
.
9
.
10
.
11
.
12
.
13
.
14
.
Tie-wraps.
Balsa stick.
