WWW.SEAGULLMODELS.COM
15
Needle Valve
3) Install the muffler and muffler exten-
sion onto the engine and make the cutout
in the cowl for muffler clearance. Connect
the fuel and pressure lines to the carburetor,
muffler and fuel filler valve. Secure the cowl
to fuselage using the M3x10mm screws.
ELECTRIC POWER CONVERSION.
1) Locate the items neccessary to install
the electric power conversion included with
your model.
1) Recommendation EP parts as shown
(not included with your model).
- Model size: .90 size models
- Motor: 50mm 310 rev per volt
- Propeller: 15x10 ~ 16x10
- ESC: 80A
- Lipo Batteries: 8 cell 5200mA
2) Attach the electric motor box to the
firewall suitable with the cross lines drawn
on the electric motor box and firewall. Us-
ing epoxy and balsa stick to secure the motor
box to the firewall. Please see pictures below.
3) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x15mm hex head bolts to secure
the motor. Please see picture shown.
15
4x20 mm
