17
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install
the engine mount included with your
model.
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the fiewall. Tighten the screws
. Make sure to use threadlock on the
screws to help prevent them from vibrat-
ing loose.
Thead locker glue.
4mm
MOUNTING THE ENGINE.
1) Position the engine with the drive
washer (145mm) forward of the fiewall as
shown.
145mm
2) Use a pin drill and 4mm drill bit to drill
a small indentation in the mount for the
engine mounting screw.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flw
through easily.
6
.
1
.
2
.
2
.
1
.
