RENO AIR CARE YAK-11 “PERESTROIKA”
Instruction Manual.
14
2) Secure the servos with the screws pro-
vided with your radio system.
.
INSTALLING THE FUSELAGE SERVOS.
.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Install the rubber grommets and brass
collets into all servos. Test fit the servos
into the fuselage servo mounts.
Rudder servo.
Elevator servo.
Throttle servo.
Elevator servo arm .
Throttle servo arm.
THROTTLE SERVO ARM
INSTALLATION.
Install adjustable servo connector in the
servo arm as same as picture below:
1
.
1
.
2
.
14
.
Rudder servo arm.
INSTALLING THE RECEIVER SWITCH.
Install the switch into the precut hole in
the side, in the fuselage.
3/32” Hole.
Trim and cut.
1
.
2
.
