RENO AIR CARE YAK-11 “PERESTROIKA”
Instruction Manual.
16
FUEL TANK INSTALLATION.
7) Slide the fuel tank into the fuselage. Guide
the lines from the tank through the hole in
the fiewall.
6) When satisfied with the alignment of the
stopper assembly tighten the 3 x 20mm ma-
chine screw until the rubber stopper expands
and seals the tank opening. Do not overtight-
en the assembly as this could cause the tank
to split.
5) With the stopper assembly in place, the
weighted pick-up should rest away from the
rear of the tank and move freely inside the
tank. The top of the vent tube should rest just
below the top of the tank. It should not touch
the top of the tank.
A
You should mark which tube is the vent
and which is the fuel pickup when you attach
fuel tubing to the tubes in the stopper. Once
the tank is installed inside the fuselage, it may
be diffilt to determine which is which.
Epoxy.
Ignition Modude.
B
2
.
3
.
4
.
1
.
Fuel pick up tube.
Fuel fill tube.
Vent tube.
5
.
8) Connect the lines from the tank to the
engine and muffl. Th vent line will con-
nectto the muffl and the line from the
clunk tothe carburetor.
Balsa wood.
