Seagull Models NIEUPORT 28 REPLICA, Assembly Manual

Page: 14 / 45

NIEUPORT 28 REPLICA
Instruction Manual.
14
1) Tape the cowl to the fuselage using
low-tack tape.
2) Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drilling
each hole.
3) With the muffl, needle valve, and spark/
glow plug removed from the engine, slide
the cowl in place over the engine. Tem-
porarily install the propeller and spinner
in order to fid the exact location of the
cowl. When satisfid with the cowl place-
ment, secure the cowl to the fuselage us-
ing masking tape.
4) Install the muffl and muffl extension
onto the engine and make the cutout in
the cowl for muffl clearance. Connect the
fuel and pressure lines to the carburetor,
muffl and fuel filer valve. Secure the cowl
to fuselage using the M3x10mm socket
head screws.
6
.
7 .
4
.
5 .
8
.
Because of the size of the cowl, it may be nec-
essary to use a needle valve extension for the
high speed needle valve. Make this out of suf-
ficient length 1.5mm wire and install it into
the end of the needle valve. Secure the wire in
place by tightening the set screw in the side of
the needle valve.
9
.
M3x10mm