Seagull Models NIEUPORT 28 REPLICA, Assembly Manual

Page: 11 / 45

11
Nylon M4x25mm.
5 .
6
.
Fuel pick up tube. Fuel fill tube.
Vent tube.
7 .
8 .
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install
the engine mount included with your
model.
8) Connect the lines from the tank to the
engine and muffl. Th vent line will con-
nectto the muffl and the line from the
clunk tothe carburetor.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flw
through easily.
1 .
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the fiewall. Tighten the screws
. Make sure to use threadlock on the
screws to help prevent them from vibrat-
ing loose.
2 .
Balsa wood.
Thead locker glue.