ET6.
Instruction Manual.
2
INTRODUCTION.
Thank you for choosing the
ET 6
ARTF by SEAGULL EP. The
ET 6
was designed with the
intermediate/advanced sport flyer in mind. It is a semi scale airplane which is easy to fly and quick
to assemble. The airframe is conventionally built using balsa, plywood to make it stronger than the
average ARTF , yet the design allows the aeroplane to be kept light. You will find that most of the work
has been done for you already.Flying the
ET 6
is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read this
manual thoroughly before starting assembly of your
ET 6
. Use the parts listing below to identify all
parts.
WARNING.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & RESPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training
procedures designed to help the new pilot on his way to successful R/C flight. They will also be able
to advise on any insurance and safety regulations that may apply.
ADDITIONAL ITEMS REQUIRED.
Motor: Ep Motor
Radio: 4channel with 5 digital servos
(mediumsize).
Speed control: 100A to 120A.
Battery: Power battery
4 - 5 cells / 3000 - 5000 mAh.
Power battery
.
