DUAL ACE.
Instruction Manual.
10
FUEL TANK.
!
1) Using a modeling knife, carefully cut
off the rear portion of
one
of the two nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
!
2) Using a modeling knife, cut one length
of silicon fuel line (not included) to 2-1/4” long.
Connect one end of the line to the weighted
fuel pickup and the other end to the nylon pick
up tube.
!
4) Carefully heat the vent tube using a
heat gun or lighter to permanently set the
angle of the tube.
When the stopper assembly is installed in
the tank, the top of the vent tube should rest
just below the top surface of the tank. It should
not touch the top of the tank.
INSTALLING THE STOPPER ASSEMBLY.
!
3) Carefully bend the second nylon tube
up at a 45º angle. This tube is the vent tube.
Vent tube.
Fuel line.
Clunk.
White glue or
epoxy glue.
Repeat the procedure for the other
aileron servo.
See pictures below.
ATTACHMENT ENGINE MOUNTING
BOX.
Push.
