background image

14

SV35.3 Series Serial ATA Product Manual, Rev. B

2.8.4

Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, 
you can control power management through the system setup program. The drive features the following 
power-management modes:

• Active mode 

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc 
access is necessary.

• Standby mode 

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set 
the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for 
a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In 
Standby mode, the

 

drive buffer is enabled, the heads are parked and the spindle is at rest. The drive 

accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive 
buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it 
receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and 
enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and 
begins counting down from its specified delay times to zero. If the standby timer reaches zero before any 
drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the 
drive accepts all commands and returns to Active mode when disc access is necessary.

Power modes

Heads

Spindle

Buffer

Active

Tracking

Rotating

Enabled

Idle

Tracking

Rotating

Enabled

Standby

Parked Stopped

Enabled

Sleep

Parked

Stopped

Disabled

Summary of Contents for SV35 - Series 500 GB Hard Drive























































Reviews: