Seagate SV35 - Series 500 GB Hard Drive, Product Manual

Page: 50 / 54

44 SV35.3 Series Serial ATA Product Manual, Rev. B
Idle Immediate 30
Idle mode 11
,
14
IEC950 19
Information Technology Equipment (ITE) 19
Initialize Device Parameters 30
Input noise ripple 13
input voltage 11
interface 9
,
27
interference 19
internal data-transfer rate OD 9
is 10
ISO document 7779 17
ITE 19
K
Korea Ministry of Information and Communication
(MIC) 19
Korean RRL 19
L
latency time 11
LBA mode 8
length 9
logical geometry 8
M
maintenance 18
master/slave 2
maximum temperature 15
Mean Time Between Failures 18
MIC 19
mounting 25
mounting screws 16
mounting the drive 23
MTBF 18
N
noise 13
nominal power 10
Nonoperating shock 16
Nonoperating vibration 16
Nonrecoverable read errors 18
O
operating 12
Operating power 11
Operating shock 16
Operating vibration 16
P
Physical characteristics 9
point-to-point 2
,
24
Power consumption 11
power consumption 11
power dissipation 12
Power modes 14
Power specifications 11
Power-management modes 14
Power-on to Ready 10
power-on-hours 18
precautions 23
printed circuit board 23
programmable power management 14
Q
quick reference 3
R
Radiated RF immunity 17
radio and television interference 19
radio frequency (RF) 17
random seeks 11
Read Buffer 30
Read DMA 30
Read DMA Extended 30
Read DMA without Retries 30
read errors 18
Read Log Ext 30
Read Multiple 30
Read Multiple Extended 30
Read Native Max Address 30
Read Native Max Address Extended 30
Read Sectors 31
Read Sectors Extended 31
Read Sectors Without Retries 31
Read Verify Sectors 31
Read Verify Sectors Extended 31
Read Verify Sectors Without Retries 31
read/write actuator arm 11
Read/write heads 8
Read/write power 11
Recalibrate 31
recording density 9
recording method 9
Recording technology 9
relative humidity 15
Reliability 18
RF 17
RMS read/write current 13
RoHS 20
RRL 19
S
S.M.A.R.T. Disable Operations 31
S.M.A.R.T. Enable Operations 31
S.M.A.R.T. Enable/Disable Autosave 31