Seagate ST118202LC, Product Manual

Page: 49 / 84

Cheetah 18 Product Manual, Rev. B 39
9.0 Interface requirements
This section partially describes the interface requirements as implemented on the drives.
9.1 General description
This section describes in essentially general terms the interface requirements supported by the . No attempt is
made to describe all of the minute details of conditions and constraints that must be considered by designers
when designing a system in which this family of drives can properly operate. Seagate declares that the drives
operate in accordance with the appropriate ANSI Standards referenced in various places herein, with excep-
tions as noted herein or in the Seagate
SCSI Interface Product Manual , part number 77738479.
9.2 SCSI interface messages supported
Table 5 lists the messages supported by the SCSI-2 and SCSI-3 modes of the family drives.
Notes.
[1]
Extended messages (see the SCSI Interface Product Manual, part number 77738479).
Table 5: SCSI messages supported by family drives
Message name Message code
Supported by
SCSI-2/3
Abort 06h Y
Abort-tag 0Dh Y
Bus device reset 0Ch Y
Clear ACA 16h N
Clear queue 0Eh Y
Command complete 00h Y
Continue I/O process 12h Y
Disconnect 04h Y
Extended messages 01h[1] Y
Identify 80h-FFh Y
Ignore wide residue (two bytes) 23h Y
Initiate recovery 0Fh N
Initiator detected error 05h Y
Linked command complete 0Ah Y
Linked command complete with flag 0Bh Y
Message parity error 09h Y
Message reject 07h Y
Modify data pointer [1] N
No operation 08h Y
Queue tag messages (two bytes)
ACA 24h N
Head of queue tag 21h Y
Ordered queue tag 22h Y
Simple queue tag 20h Y
Release recovery 10h N
Restore pointers 03h Y
Save data pointer 02h Y
Synchronous data transfer req. [1] Y
Target transfer disable 13h Y
Terminate I/O process 11h Y
Wide data transfer request [1] Y