Seagate Scorpion 240 DDS-4, Installation Manual

Page: 34 / 321

A-32 Scorpion 240 Autoloader Installation Manual
LCD Message Description
READY The autoloader has scanned all cartridge slots in the
magazine and is ready to perform an action.
READY TAPE X There is a tape (from slot X) in the tape drive and the
autoloader is ready to accept commands.
REPLACE CLEANING
TAPE
The cleaning cartridge has been used up and must be
replaced with a new cleaning cartridge.
REWIND TAPE X The tape drive is rewinding the tape cartridge from slot X.
SCAN X The autoloader is sequentially scanning the cartridge slots
in the magazine.
SEARCH TAPE X The tape drive is searching the tape cartridge from slot X.
SELECT X
PUSH ENTER
This message displays when you press the Select button.
Press the Select button repeatedly to display the desired
tape number ( X ); then press the Enter button to load the
selected tape into the drive.
SELECT PREVENT The autoloader is preventing you from selecting a tape to
load because a Prevent Media Removal command has
been issued by the host. This prevents the tape that is in
the drive from being ejected.
UNLOAD TAPE X The tape drive is unloading the tape cartridge from slot X.
UPDATING FIRMWARE The autoloader or tape drive firmware is being updated.
WAITING
SELFTEST
This message displays while the tape drive is performing a
Power-On Self-Test (POST) during startup.
WRITE TAPE X The tape drive is writing to the tape cartridge from slot X.