Seagate Scorpion 240 DDS-4, Installation Manual

Page: 25 / 321

Scorpion 240 Autoloader Installation Manual A-23
3. Insert the cartridge into the magazine with the door facing
toward the magazine slot, as shown in Figure 9.
Figure 9. Inserting a cartridge into the autoloader
magazine
Cartridge door
Loading a magazine into the autoloader
Caution. Do not load a magazine if all the LEDs are flashing;
this indicates that the drive is performing a power-
on self test.
1. Make sure the drive is powered on and operating
normally.
2. Hold the magazine so that the slot numbers are right-
side-up.
3. Write protect or write-enable the magazine as
appropriate. See page A-38 for details.
4. Insert the magazine into the autoloader with the triangles
facing into the autoloader bay, as shown in Figure 10 on
the following page. Gently push the magazine into the
autoloader bay until the autoloader mechanism senses
the magazine and pulls it inside.