5. Click Apply.
Configure iSCSI ini ator/target(s) on the host side
Enable iSCSI upon startup
1. On the Linux station, open a terminal session.
2. To enable iSCSI, enter the following:
sudo apt install open-iscsi
Lyve Client will only accept numerals and decimals in accordance with IP addressing
conventions and will remove invalid characters (alphabetical characters, spaces, and
symbols). Lyve Client will report invalid IP addresses if an octet value entry:
Exceeds a permitted range (for example, entering a value greater than 256).
Results in IP address/default gateway addressing inconsistencies not permitted by the
defined subnet mask.
Results in ports with identical IP addresses.
For reference, see the following:
Ubuntu documentation
Debian documentation
88
Lyve Mobile Rackmount Receiver
7/26/22
Summary of Contents for Lyve Mobile Array
