Seagate Lyve Mobile Array, User Manual

Page: 55 / 117

Requirements
Hardware
Host connec on
Windows PC host computer with Windows 10 Pro, Windows 11 Pro, Windows Server 2019 or higher.
iSCSI host connection with assigned addresses and on the same data network/subnet as the target iSCSI
ports on Lyve Mobile Rackmount Receiver. If the host and target connections are not on the same
network/subnet, your network infrastructure must be capable of routing and managing traffic between
subnets. Note that for optimal performance, the host connection should have a transfer rate that matches
the target connection ports.
Ethernet (copper cat5e and above)/SFP+ (optical) cables supporting the host and target data connection
ports. Use the correct cables for your environment.
Target connec on
Rackmount Receiver with iSCSI 25Gb 4-port 10Gb (SFP+) or iSCSI 10GbaseT 2-Port (RJ45) ports
connected to the data network.
Ethernet cable connecting the management network to the appropriate Ethernet management port (Slot
A or B) on the back of Rackmount Receiver.
55 Lyve Mobile Rackmount Receiver 7/26/22