Revision 2012.02.27
13
Exiting service mode
The controller will remain in service mode as long as the user keeps using the keypad to move through the various
service mode MENUS. The controller will automatically exit service mode and return to sales mode if any of the following
occur:
1) The user is inactive for more than 3 minutes
2) The user presses the EXIT key (G).
When service mode is exited the beeper will sound twice and the installed firmware version will be shown on the display
for three seconds, then the controller will revert to sales mode.
Service mode MENUS
The chart below shows the sub-menus while in Service mode:
PRICES SUB-MENU
The Prices sub-menu allows you to set prices in three different ways – Set ALL, Set ONE, Set Tray. Set ALL will allow you
to set all of selections in the machine to the same price. Set ONE will allow you to set one individual selection of your
choosing. Set Tray will allow you to set an entire tray to the same price.
Using these available options will save you time – if the majority of your price is, for example, set at $1, use the Set ALL
sub-menu to set all prices to $1. You can then go back and set individual prices for certain selections as needed.
1. Prices
1. 1 Set ALL (Main)
1.1.1 Enter Price
Enter (F)
Enter (F)
Enter (F)
