Revision 22 13.10
35
SECTION 5 DELIVERY OF PRODUCT
DELIVERY SYSTEM
Your vendor consists of the Keypad, 2 Line VF Display, Driver Motors, Product Trays, Helix Coils and Delivery Bin. The
customer inserts money and enters their selection on the Keypad. The selection's Driver Motor turns the Helix Coil that
vends the product into the Delivery Bin.
PRODUCT TRAYS
The SP Series features lock and release product trays. On the right side of each product tray you will find a Locking Lever
(Fig. 14). To pull out the Product Tray push down on the Locking Lever and roll toward you to tilt position. Or completely
push the locking lever to the back.
Fig. 14
PRICE SCROLLS AND SELECTION LABELS
Price scrolls showing denominations from .50 to 6.00 are fitted to each tray position. To adjust the pricing display, use
your thumb or finger to rotate the scroll to show the desired price (Fig. 15). Note: this does not change the price of the
item but only the display. The actual price must be changed via the service mode menus detailed in Section 3 of this
manual.
Fig. 15 – Adjustment of Price Display
Note that the word “STOP” showing in the price display is an indication that you should stop rotating the scroll as the end
has been reached. Should the scroll end become disengaged from the tray, simply remove the Selection Label and
reinsert the scroll end. Rotate the scroll to the proper position and replace the Selection Label.
Fig. 16 – Replace Price Scroll
Locking Lever
Rotate UP to increase
Rotate DOWN to decrease
Remove Selection Label
Reinsert price scroll
Blank white squares are available on the price scrolls just before
the STOP indicator for custom pricing.
