Revision 22 13.10
15
Using these available options will save you time – if the majority of your price is, for example, set at $1, use the Set ALL
sub-menu to set all prices to $1. You can then go back and set individual prices for certain selections as needed.
In order to enter the price, Press the corresponding number. For example, if the Price of a Selection is $0.75, then Press
“7” and “5”. Press F to accept the value; G to exit to the main menu.
Note: Discount prices can only be set using a Seaga
Smart Card.
DIAGNOSTICS SUB-MENU
Diagnostics -
The Diagnostics menu is used to test various features of the machine. Certain critical features of the
machine are protected by a pass code provided to the operator to prevent inadvertent modifications to the machine.
1. Prices
1. 1 Set ALL (Main)
1. 3 Set One (Main)
1.1.1 Enter Price
1.3.1 Enter Row/Column
1.3.1.1 Enter Price
1. 2 Set Tray (Main)
1.2.1 Enter Tray Letter
1.2.1.1 Enter Price
2. Diagnostics
2. 1 Keypad
2. 2 Motor
2. 3 Positive Vend Sensor
2. 4 Display Errors
Test any key on the keypad. Note: you
must let this function time-out to exit.
2.2.1 Enter Row/Column
Tests Individual Motors
Tests the vend sensor – Beam Clear or Beam
Blocked message displayed
2. 5 Display Defrost Status
2. 6 Relays
2. 7 Door Switches
2. 9 Clear Errors
2. 9 Display Temps
2. 10 Passcode
Tests the components connected via Relays –
ON/OFF
Tests the status – ON/OFF – 2 DOOR
SWITCHES
Clears all errors
Display Temperatures of Zone 1 and
Zone 2
Display/edit the PassCode
2. 8 Home Motors
Test the motors, if they are home and counts the
total number of motors in the machine (Fig. 12)
Tests the Defrost Status and displays information
on Time of Defrost, Duration and No. of intervals
per day. Fig (12)
Displays the Errors Logged on the VMC
(F)
(F)
(F)
(F)
(
↓
)
(
↓
)
(
↑
)
Press (F)
to
complete
Press (F)
to
complete
Press (F) to complete
(F)
(F)
(F)
(F)
(F)
(F)
(
↓
)
(
↓
)
(
↓
)
(
↓
)
(
↓
)
(F)
(
↓
)
(
↓
)
(
↓
)
(F)
(F)
(F)
(F)
(F)
(
↓
)
(
↓
)
2. 12 MDB Data
Display MDB Data
(F)
(
↓
)
Note: you must let this function time-out to exit.
