SeaDoo SPARK 2022 Series Operator'S Manual Download Page 93

Page: 93 / 196

MESSAGE DISPLAYED
SPORT MODE ACTIVATED

OTTEE::

After a few seconds, the gauge will re-

vert to its normal display.

4. Ensure the SPORT mode indicator

is turned on.

SPORT MODE INDICATOR

OTTEE::

The SPORT mode indicator will come

on and stay on as long as sport mode

is active. If the throttle is not fully re-

leased and the engine is not at idle,

SPORT mode cannot be activated.

The following message will then ap-

pear in the multifunction gauge.

MESSAGE DISPLAYED
SPORT MODE - RETURN TO

IDLE TO ACTIVATE

Release the throttle. Once the en-

gine has returned to idle, SPORT

mode will be activated.

Deeaaccttiivvaattiinngg SSppoorrtt M

Mooddee

To deactivate sport mode, carry out

the following:

WAAR

NIIN

Whheenn ddeeaaccttiivvaattiinngg ssppoorrtt m

mooddee,, bbee

ssuurree ttoo m

maaiinnttaaiinn ssiittuuaattiioonnaall

aaw

waarreenneessss ooff ootthheerr w

waatteerrccrraafftt,,

oobbssttaacclleess,, oorr ppeerrssoonnss iinn tthhee

waatteerr..

1. Depress and hold the MODE but-

ton for 3/4 of a second.

OTTEE::

The following message will scroll in

the multifunction display: SPORT

MODE DEACTIVATED.

OPERATING MODES (ROTAX 900 ACE - 90)

Summary of Contents for SPARK 2022 Series





































































































































































































Search results

Summary of Contents for SPARK 2022 Series

Reviews:

SeaDoo SPARK 2022 Series, Operator'S Manual, Page: 93 / 196

Search results

Summary of Contents for SPARK 2022 Series

Reviews: