Website: www.seada.co.uk
5 / 47
E-mail: [email protected]
1.2 Initial configuration
1)
Powering on the device:
Connect DC12V power supply adapter with power supply socket or via PoE if the model
supports it.
2)
Initialization:
Device is powered on when the power indicator light on the front of the device and remote-control receiver
light begins blinking, camera head moves from bottom right to the bottom, and then goes to the HOME position (intermediate
position of both horizontal and vertical). When remote control receiver light stops blinking, the initialization is finished
Note: If device has preset 0 setup, when initialization is completed, the camera automatically moves to the preset
0 position.
1.3 Video Output
This series has a variety of video output; SHLP/SHLPN models have video output from LAN, HDMI and 3G-SDI, U2U3HL
models from LAN/USB2.0/USB3.0/HDMI ports.
1)
Video Output from LAN
a. Network Cable Connection Port: SHLP/SHLPN Model--No.12 in Figure1.1; U2U3HL Model --No.10 in Figure1.2.
b. Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter to get
into the login page; click on the “player is not installed, please download and install!" and follow the installation steps
for installation if using Internet Explorer/Microsoft Edge. Then enter the username:
admin
and password:
admin
(factory
default); press Enter to enter the preview page, users can carry out PTZ control, video recording, playback, configuration,
and other operations.
2)
HDMI Video Output
a. HDMI Port: SHLP/SHLPN model--No.11 in Figure1.1. U2U3HL models--No.9 in Figure1.2.
b. Connect the camera and the monitor via an HDMI video cable; video output is available after camera initialization.
3) 3G-SDI Video Output
a. 3G-SDI video cable connection: SHLP/SHLPN model--No.10 in Figure1.1
b. Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera initialization.
4) USB3.0 Video Output (compatible with USB2.0 output)
a. USB3.0 video cable connection: U2U3HL model--No.8 in Figure1.2.
b. Connect the camera and the PC via USB3.0 video cable, open video display software, select image device, and then
video output will be available.
5) USB2.0 video output
a. USB2.0 video cable connection: U2U3HL models--No.7 in Figure1.2.
b. Connect the camera and the PC via USB2.0 video cable, open video display software, select image device, and then
video output will be available.
