Website: www.seada.co.uk
29 / 47
E-mail: [email protected]
3) Multicast/Unicast
Stream:
Choose from Main/Sub video stream output.
Enable:
Enable the RTP Multicast.
Protocol Type:
Choose the multicast protocol (Default: RTP, TS for option).
Address
：
Default
224.1.2.3. It can be edited.
Port
：
Main stream Default Port:
4000, Sub Stream Default Port: 4002
Note: Access Method: rtp://224.1.2.3:4000; udp://@224.1.2.3:4000.
4) Video Parameters
A: Focus:
Focus Mode: set the focus mode (the default auto, manual optional)
AF-Zone: set the focus range (the default middle, the upper and lower optional)
AF-Sensitivity: Set the focus sensitivity (default is low, high, medium optional)
B: Exposure:
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture priority, Brightness
priority optional)
EV:
Exposure compensation setting is active when it is auto status (default is off).
EV Level:
Set the exposure compensation value, valid when it is set for auto (default 0-7 to 7 optional).
BLC
: Set back light compensation, valid when it is auto status (default is off).
Flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default 50Hz,
closed,60Hz optional).
G.Limit:
set the gain limits, auto, active when it is status of aperture or brightness priority (default 3, 0-15 optional).
DRC:
set the dynamic range (default 5,0-8 optional).
Shutter:
active when it is status of manual or shutter-priority (default 1/100
，
1/25
、
1/30
、
1/50
、
1/60
、
1/90
、
1/100
、
1/120
、
1/180
、
1/250
、
1/350
、
1/500
、
1/1000
、
1/2000
、
1/3000
、
1/4000
、
1/6000
、
1/10000 optional).
C: Color:
WB Mode:
Set the white balance mode (the default automatic,3000K,4000K,5000K,6500K, manual, One-push optional).
Note: Click the “Correction” button when selected the One-push white balance mode.
