manualshive.com logo in svg

Seacam SEAFLASH 160DIGITAL, User Manual

Share
Download
Seacam SEAFLASH 160DIGITAL User Manual Download Page 35

35

1.

 In the setup menu 

SET

, select the Firmware Upgrade and switch it to 

YES

, then 

  activate it by pressing the push button (3).
   

Firmware upgrade  YES

2.

 The strobe will now ask for a USB connection. Connect the USB cable to your 

  computer with the 

S6/USB adapter

 provided with the unit.

  

Firmware

  

upgrade

   

Connect USB

  

cable.

3.

 With an established connection, the computer now will show the strobe as a 

  USB mass storage. The device is a FAT device (100kB, 512 bytes, no exFAT)

4.

 If required by the computer’s operating system, format the drive as above. 

  If possible, keep the flash drive empty with no file or directory inside to 
  maximize free space for firmware upgrades.

5.

 The strobe will now ask you to copy the file SF160vxx.bin:

   

Copy here

  

SF160vxx.bin

   

then remove

   

USB cable.

  Copy the file, wait for the operation to be completed, then remove the USB cable. 
  After an internal system check, the memory overwrite will start when the cable 
  is removed.

Firmware Upgrade

Summary of Contents for SEAFLASH 160DIGITAL




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands