23
lamp or both, the fi rst and the last. An increase of one lamp energy will result in a
more evident, more marked frozen image corresponding to that lamp. It can be used
to mark the beginning of movement, the end of movement or both – all within one
picture.
6. Dual / Multiple Flash Operation
If more strobes are connected to a digital camera using a cable connection with
all pins connected, all digital features and all shooting modes are available on the
connected strobes.
IMPORTANT
One strobe has to be set as
MASTER
while all the others have to be set as
SLAVE
.
This is also a precaution to avoid damage on the communication port of camera
and strobes.
ATTENTION!
DO NOT CONNECT DIFFERENT STROBE BRANDS OR MODELS!
Always
contact SEACAM for additional information on handling strobe combinations.
To set the SEAFLASH 160
digital
to
MASTER
or
SLAVE
, enter SET with the power
switch (1), select MASTER or SLAVE with the rotary switch (2) and activate the mode
needed with the push button (3). The unit will reboot in the mode selected.
In Slave mode, an
(s)
appears on the display after the
CB
label:
CBs
– it allows
to identify the slave units. The factory setting of the unit when delivered is always
MASTER.
Shooting Mode – Cable
ATTENTION!
DO NOT CONNECT DIFFERENT STROBE BRANDS OR MODELS!
Always
contact SEACAM for additional information on handling strobe combinations.
